When we sell a Yacht Devices YDEG-04 Engine Gateway we always like to do our homework before the sale is completed to ensure the gateway will work with your engine. While not an exhaustive list we have put together a selection of some of the engines we have supplied the YDEG-04 for and if any adaptor cables are required along with any relevant notes.
As always, even if you see your engine model listed below do not assume it is compatible. Please contact us with the full model, serial number and any photos you have of the control panels or anything else you feel is relevant to assist us in confirming compatibility.
We will happily program all engine gateways we sell for free.
| Make | Model | Adaptor Required | Notes |
| Volvo Penta | 5.7 OSXi-G | Vodia 8 pin | Requires programming |
| Volvo Penta | 5.0GXi-F (AQ) | Vodia 8 Pin | Requires programming |
| Volvo Penta | DP-435 KA | No | Connect to HCU or EVC Tacho |
| Volvo Penta | D12 | EVC-A MC 12-pin C5:ENGINE | Requires programming |
| Cummins | QSM11 | Smartcraft adaptor or Cummins 9 pin round | Requires programming |
| Volvo Penta | D3 160hp | EVC-A MC 12-pin C5:ENGINE | Requires programming |
| Nanni | Any with interactive display | Nanni adaptor | Requires programming |
| Volvo Penta | D4 260 | No | |
| Volvo Penta | D55N | No | |
| MAN | Any with J1939 module installed | DIY adaptor required | MMDS-CLC and Murphy PV-101 displays = compatible |
| Steyr | SE286e40 | Rewire gateway 6 pin | |
| Volvo Penta | D1-30B (2008) | No | |
| Volvo Penta | D2-55E | No | |
| Yanmar | 4JH57 | Yanmar 4JH adaptor | Can also rewire another adapt. |
| Yanmar | 4JH80 | Yanmar 4JH or B25/C35 adaptor | Adaptor choice depends on control panel |
| Mercury | 50HP 4 stroke (2005) | Smartcraft adaptor | May require special programming |
| Cummins | QSB 5.9 | Smartcraft adaptor | Requires programming |
| Caterpillar | C12 | Caterpillar 12 pin display adaptor | |
| Volvo Penta | D4-260 | No | Connect to Multilink bus |
| Caterpillar | 3412e | Caterpillar 12 pin display adaptor | |
| Volvo Penta | 5.7 Gi-300-N | Maybe, depends on tachometer used | |
| Volvo Penta | 4.30 GxiE-M | Rewire current or Vodia adaptor | |
| Volvo Penta | 5.7 OSi-E | Vodia 8 pin adaptor | Requires Programming |
| Volvo Penta | 200-A | Rewire gateway 6 pin for Vodia | Requires Programming |
| Volvo Penta | D6-480 | No | Connect to Multilink bus |
You can view further details on the Yacht Devices Product Page