The NMEA 2000 Tank Adaptor from Yacht Devices allows a simple connection to a resistive type tank sensor to provide level information to chart plotters or instrument displays.
The adaptor can be used for level measurement of diesel, petrol, oil, fresh water, waste water, black water or a live well. Up to 16 adaptors of one type can be connected in a NMEA 2000 network.
Adaptor compatibility
- European senders (10 to 180 Ohm range)
- American senders (240 to 33 Ohm range)
- Japanese senders (0 to 310 Ohm range)
- Other senders with a maximum resistance of less than 400 Ohm
NMEA 2000 Tank adaptor Features
- Can be installed standalone or in parallel with existing analogue gauge.
- Works with gauges which include a button to change level display
- 12 point calibration to ensure accurate readings
- Can be converted for use as a pressure sensor adaptor and read pressures from a resistive or voltage pressure sensor.
- Powered from the NMEA 2000 network. No other power source is required.
Related products
- Can create an alarm and turn on/off a pump or other equipment using the circuit control device.
- Use the Wi-Fi Gateway to visually display tank levels on tablets and PCs onboard.
New to NMEA 2000?
If you are new to NMEA 2000 don’t worry. We have all the knowledge required to assist you connecting the Tank Adaptor including if you don’t have an existing NMEA2000 network we can supply a NMEA 2000 Starter Kit.
Manufacturers Product Page: Tank Adaptor
Follow Us on Facebook